33 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Knob and Bushing Puller

    Knob and Bushing Puller

    This "two-in-one" tool for easily remove guitar knobs and bushings without damaging.

    The Knob and Bushing Puller's clear acrylic housing has a rubberized base to help protect the guitar's finish. The square unit has 2 ends- one end for pulling knobs, the other end can work with the attached hardware to easily extract Gibson, Schaller or Gotoh bridge and tailpiece stud bushings, without damaging the guitar.

    Instructions and bolts for pulling various threads are included:

    Learn More

  2. Binding Router Jig

    Binding Router Jig

    Cut perfectly squared binding ledges on any instrument, including archtops.

    This jig turns your laminate router into a floating cutter. As you move the body of the instrument into the cutter, your router glides vertically to follow the body's top edge. Bindings fit correctly, so you won't have to scrape them too thin.

    The problem: The arch of the guitar top, and especially the back, will change the router alignment. Without this tool, a standard router base will tilt, causing the routed channel to be too deep or too shallow; the bindings won't fit right. The Binding Router Jig keeps the router vertical for a square ledge. Bindings fit correctly.

    Every parts in the first picture is included.

    Learn More

  3. Mounting Template for Binding Router Jig

    Mounting Template for Binding Router Jig

    When you use Binding Router Jig with a different brand laminate trimmer (different with Bosch Colt Router), and your laminate trimmer/router doesn't line up with the mounting holes, then this Router Mounting Template is what you need, it can help locate and drill new holes on the carriage.

    Learn More

  4. Fret Slotting Miter Box

    Fret Slotting Miter Box

    Using this Fret Slotting Miter Box to accurately cut fret slots with a fretting handsaw. The ball-bearing guides that make sawing easier and faster, they hold your fret saw perpendicular to the fingerboard, and can be adjusted to match the blade precisely. You can quickly slot any board up to 3" (76.2mm) wide, with adjustable depth of cut for any fretwire. You always have an unobstructed view of your work.

    Learn More

  5. Soundhole and Rosette Routing Jig

    Soundhole and Rosette Routing Jig

    The Soundhole and Rosette Routing Jig is a quality machined tool, designed to be used with the Precision Router Base and works with your Dremel.To cut perfect soundholes and rosette channels for guitars and ukes.It's easy and accurate, this jig can be adjusted from 6"-diameter to a small 2" cut.

        Solid aluminum and brass parts
        Adjusts from 2" to 6"-diameter cuts (50.8mm to 152.4mm)
        Indexing scale to quickly set routing diameter
        4mm registration pin for perfectly concentric circles
        Mounting screws included

    Learn More

  6. Precision Router Base

    Precision Router Base

    A stable and versatile way to support your Dremel tool.
    This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
    •    Excellent control
    •    Easy installation
    •    Accurate freehand routing

    Learn More

  7. Fret Bender

    Fret Bender

    Multi-functional Fret Bender- Bend or Staighten either bulk fretwire or pre-cut short piece fret wire precisely and fast!

    For Bending fret wire, crank a length of fretwire through the FretBender, and it comes out curved and ready to install in a radiused fretboard. Get a perfect bend on enough wire for a whole guitar in just seconds. Precisely radiused fretwire makes your fretwork fast, accurate, and professional.

    For straighten fret wire, use left 2 rollers, input the fret wire from left, through adjusting thumbwheel, you can control the straightness of fret wire that you want.

    Learn More

  8. Fret Press Inserts

    Fret Press Inserts

    These 2-1/2"-wide grooved brass caul inserts fit our fret pressing tools and are designed for working with radiused or flat fretboards.

    The milled groove on the bottom keeps each caul properly centered on the fret.

    The 6" radius holds down the fret ends for gluing , especially important on the tight 7-1/4" radius found on many Fenders.

    Learn More

  9. Fret Press Caul

    Fret Press Caul

    Use your drill press! this self-leveling steel fretting caul has a 3/8" shank to fit your shop arbor press or your drill press.

    Caul only.

    Learn More

  10. Handheld Fret Press

    Handheld Fret Press

    Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot, you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck and 9 interchangeable 2-1/2" brass inserts for your choice, grooved to fit over the fretwire crown.

    This is a durable steel tool that's easily adjustable. It has a fine thumbwheel adjustment for clamping pressure. A clamp release lever unlocks the tool. Jaws opens enough to accommodate any instrument neck.

    The full length of this tool is about 12.5"(320mm)

    Learn More

  11. Luthier Digital Caliper

    Luthier Digital Caliper

    This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire.  And there's a notch on the depth gauge to measure fret height on the instrument.

    • Measures fret height before AND after fret installation
    • Accurate readouts in inches or millimeters
    • A must for all precision guitar work

    Learn More

  12. Diamond Fret File

    Diamond Fret File

    Dual edges, one for narrow/medium and one for medium/wide fretwire. The edges are electro-coated with micro industrial diamonds, it's more smoothly than toothed files, for cleaner filing without chatter marks. Available in either 150 grit or 300 grit.

    Each file is 9-3/8" x 5/8" x .177", with 5-3/4" filing edges and a comfortable rubber-coated handle, (Black color=150 grit, Red color= 300 grit)

    Learn More

  13. Offset Diamond Fret File

    Offset Diamond Fret File

    This diamond fret file is offset, for more comfortable fret dressing and improved clearance over the guitar body at higher frets.

    Dual edge (one side for narrow/medium fretwire, the other side for medium/wide wire), and both full-length concave filing grooves are uniformly coated with micro industrial-diamond particles.
    8-1/2" x 1" x 5/32". Available in either 150-grit or 300-grit.

    Learn More

  14. String Action Gauge

    String Action Gauge

    Fast, accurate measurements for setups!
    This pocket sized measuring instrument can be used for accurately measuring not only string action but also the following:
        • String to pole piece distance,
        • Fret slot depth
        • String nut slot depth
        • Pole piece height
        • Saddle height and slot depth
    Available in both inches and millimetres.

    Learn More

  15. String Spacing Rule

    String Spacing Rule

    If you make nuts for any stringed instrument, this tool is a must have.
    Get accurate spacing without calipers, calculators or shop rulers.
    Made from flexible stainless steel so it will be conformal to both arched or flat nuts.

    Learn More

  16. String Spreaders

    String Spreaders

    Simply get the strings out of the way when you doing a spot job on the nut or fretboard! Try these handy string spreaders instead of the makeshift method you've been using, they'll become a busy addition to your basic tools.
    Made of brass with rubber coating, 3-3/8" long, set of 2.

    Learn More

  17. Bevel Diamond Fret File

    Bevel Diamond Fret File

    This new bevel diamond fret file has Double Angles!
    This bevel diamond fret file is a economical fret crowning tool that can works on any varisized frets. There are 2 beveled surfaces with diamonds will file the sides of frets and preserve the top, saving your fret leveling.

    Available in either 200 grit or 400 grit. If you're just starting out in fretting, we recommend the 400 grit, as they don't remove too much material too soon. And the 200 grit can mill off material more quickly, and it’s longer lasting.

    Made from steel, with durable diamonds.

    Dimensions: Length-1.30”(33mm); Width-.394”(10mm); Height-.472”(12mm).

    Learn More

    Out of stock

  18. Notched Straightedge

    Notched Straightedge

    The notched straightedge has become a standard for evaluating fretboards. The notches fit right over the frets so you can check the straightness of the fretboard itself, without the interference of worn or badly-seated frets.

    Learn More

  19. Radius Gauges

    Radius Gauges

    Quickly find the curvature of a fingerboard or bridge with this set of radius gauges. Use them to measure fret board radius, saddle radius nut radius accurately and check your work as you smooth or shape a fingerboard or frets.

    The radius gauges comes in all popular fingerboard radii. (7.25", 9.5", 10", 12", 14", 15", 16" and 20"). Set of 2, One gauge has 7.25”, 9.5”, 10”, and 12” radii. The second has 14”, 15”, 16”, and 20”.

    Learn More

  20. Notched Radius gauges

    Notched Radius gauges

    Notched radius gauges work with strings on!
    This new version gauge is handy when you want to check a fingerboard without taking the strings off. The set includes closely-spaced string notches for use near the nut, and wider spacing for use near the body (great for compound radius fingerboards).

    Set of 4, including narrow notches type and wide notches type, each type comes in all popular fingerboard radii- (7.25", 9.5", 10", 12", 14", 15", 16" and 20")

    Learn More

  21. Nut Slotting Gauge

    Nut Slotting Gauge

    The Digital Nut Slotting Gauge quickly and precisely measures the heights of the strings over the first fret, so you can file nut slot depths more accurately than ever before. That means easier, more consistent playability, that you can custom-tailor to individual instruments and playing styles. No more guesswork or "eyeballing" the string heights, and no more searching for elusive combinations of feeler gauge.

    Learn More

  22. Understring Radius Gauges

    Understring Radius Gauges

    Fast, accurate bridge saddle adjustment!
    These handy set 8 of gauges comes in all popular fingerboard radii. (7¼", 9½", 10", 12", 14", 15", 16" and 20").
    They can be used to accurately measure fret board radius, saddle radius nut radius from either the top or the bottom radius surface.
    Set of 9 now includes new 17" radius for Ibanez guitars!

    Learn More

  23. Fret Rocker

    Fret Rocker

    No more gussing for the fret height and no more buzzing!
    The Fret Rocker can pinpoint those pesky high frets, and check the final height after you've redressed or replaced them.
    4-in-1 mini straightedge spans three frets, Precision-machined for accuracy to .0008" per foot, the 4", 3", 2" and 1-5/16" edges make it versatile for any fretted instrument, from basses to guitars to mandolins.

    Learn More

  24. Fret Puller

    Fret Puller

    If you need a tool that will remove frets from fingerboards with little or no damage these pliers will do the job.
    The fret puller with special flush ground 1/2" jaws, can easily bite the frets, without fretboard damaging.

    Learn More

  25. Fret Cutter

    Fret Cutter

    Spend less time filing fret ends! This is the best tool for trimming the ends off fretwire. The jaws are specially hardened for fret work, and they're profiled and flush-ground to cut the wire Very close to the fretboard. The result is a cleaner cut without pulling the wire, so you'll need to do less filing. Rubber coated handles are very comfortable and allow better access to the frets over a guitar body.

    Learn More

  26. Fret/Fingerboard Levelers - 8"

    Fret/Fingerboard Levelers - 8"

    Precision-ground for flatness. Fast, accurate leveling tools for the pro shop. This heavyweight steel tube is precision-ground for flatness on the narrow sides. Attach abrasive to quickly level frets or unfretted fingerboards.

    Each heavyweight rectangular 1" x 2" steel tube is precision-ground for flatness on two opposite sides. The tool's edges are smooth to prevent gouging.

    Available in two lengths, this one is 8 " (203.2mm), click here to check 16" length

    Learn More

  27. Fret/Fingerboard Levelers - 16"

    Fret/Fingerboard Levelers - 16"

    Precision-ground for flatness. Fast, accurate leveling tools for the pro shop. This heavyweight steel tube is precision-ground for flatness on the narrow sides. Attach abrasive to quickly level frets or unfretted fingerboards.

    Each heavyweight rectangular 1" x 2" steel tube is precision-ground for flatness on two opposite sides. The tool's edges are smooth to prevent gouging.

    Available in two lengths, this one is 16 " (203.2mm), click here to check 8" length

    Learn More

  28. Fingerboard Guards

    Fingerboard Guards

    Protect the fingerboard while you file or polish the fret.
    These shields are indispensable when doing any sort of fret work. Being only .010” thick they can bend to accommodate and fingerboard radius.
    Made of 304 spring stainless steel.

    Inlude   1 pcs 3-1/8" x 7/8" x .010"
                1 pcs 3-1/8" x 0.59" x .010"

    Learn More

  29. Multi Spanner

    Multi Spanner

    This pocket-size toothed wench will tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup switch, tuning machine and bridge thumbwheels.

    All edges and surfaces have been chamfered and polished to avoid damage to body and surrounding areas.

    Made of 1.90mm (0.75”) stainless steel.

    Learn More

  30. Jack Mount

    Jack Mount

    Everybody loves Tele's®, but the most common problem is the jack coming loose and eventually either falling out and/or wires breaking. This simple device ends the worry as the jack screws into the jack mount and the jack mount is held in place by two screws.

    No modification is needed to the output jack hole. Just screw in the jack, fit the jack mount into the original hole and used the supplied screws to attach the jack mount.

    Available in three colors- gold, silver, black.

    Learn More

  31. Tremolo Stopper

    Tremolo Stopper

    keep your guitar in tune and keep your bridge locked in place
    Use the Tremolo Stopper, this is an efficient and economical way to resolve tremolo return positioning problems, block your bridge from floating,  this unit is for Fender/Floyd Rose style locking tremolo bridges and non locking tremolo bridges. Screwed into the rear cavity between the tremolo springs, it provides a back stop for the bridge.
    Made of brass, mounting screws and allen key included.

    Learn More

  32. Feeler Gauge

    Feeler Gauge

    This precise set of 20 feeler gauges in the luthier's workshop can perform a wide variety of functions to measuring with string action to measuring the correct nut slot depths, fret slot width, string to fret clearances, and other hardware installation work, these ground steel feeler gauges are marked in both metric and imperial measurements for easy use.

    Learn More

  33. Knob Position Indicator

    Knob Position Indicator

    These indicators can be retrofitted to most control knobs to allow visual reference of the position of the volume/tone knob.

    Available in gold and nickle. Sold separately.


    Learn More

33 Item(s)

per page

List  Grid 

Set Descending Direction